Mtech-Adsorption type oil-water separator(OSU-20)

Sold By: Mtech

Out of stock

◆ Shipping charges will be charged separately!

-Adsorption type oil-water separator
-LW-MTS-OSU series
-Industry’s first filling material storage! Cartridge method
-Filled with high-performance oil-impregnated wastewater treatment material “Filtor FT”
-The recovery part has a float structure that follows liquid level fluctuations.
-Continuous suction and recovery of surface oil
-Consumables are oil adsorbents only,
-Low running cost

 

Report Abuse

-Adsorption type oil-water separator
-Model: LW-MTS-OSU series
-Industry’s first filling material storage! Cartridge method
-Filled with high-performance oil-impregnated wastewater treatment material “Filtor FT”
-The recovery part has a float structure that follows liquid level fluctuations.
-Continuous suction and recovery of surface oil
-Consumables are oil adsorbents only,
-Low running cost

Equipment configuration

-Oil recovery float unit
-Water supply unit (pump: separate type)
-Oil adsorption device Unit

Use

The oil film and surface oil floating on the premises drainage pit and the existing oil-water separation tank are recovered by the oil recovery float floating on the liquid surface, and the oil and water are separated by the oil-water separation device (oil adsorption method). To do.

 

Feature

1. The industry’s first storage of filler! Uses a cartridge method (processing amount: approx. 5 liters / minute / book)
-1_1: Easy to replace the filler! (The filler is packed in a mesh bag.)
-1_2: Compact design allows effective use of space.
-1_3: The number of cartridges used can be set according to the estimated oil processing amount.

2. Since it is filled with “Filtor FT”, a high-performance oil-containing wastewater treatment material that can also treat emulsified oil (engineered mardiyonization), the treated water can be n hexane extract substance: 5 ppm or less.

3. The recovery unit has a float structure that follows liquid level fluctuations and continuously sucks and recovers surface oil.

4. Consumables are oil adsorbents only. The running cost is low.

============================================

 

Specification

Type:
OSU-20

1.Overview

1_1:Oil / water recovery amount:
From 10 to 20 liters / minute

1_2:Target oils:
mineral oils, animal and vegetable oils

1_3:Collection method:
Float type

2.Oil recovery float unit

2_1:External shape:
φ500 x 420

2_2:Oil recovery port:
Select according to the installation environment and processing amount

2_3:Weight (excluding hose):
6 kg

2_4:Hose:
25A

2_5:Material:
Resin, SUS304


3.Water supply unit

3_1:Pump:
We will select according to your company’s lift and specifications.


4.Oil adsorption device unit

4_1:Shape:
500 x (500) x (1920)

4_2:Filling material:
Filtor FT 24kg

4_3:Weight (when full):
170 kg (250 kg)

4_4:Raw water inlet diameter / Raw water return diameter:
20A

4_5:Treated water outlet diameter:
40A

4_6:Drain caliber:
40A

* Model selection may differ depending on the conditions of raw water. Please contact us for other flow rates.

* Dimensions and weight are built-in options.


5.Test data / Analysis result

5_1:Biochemical Oxygen Demand (BOD)
Raw water: 98.0mg/ℓ / Treated water: 5.8mg / ℓ or less / Analysis method: JIS K010221

5_2. Chemical Oxygen Demand (CODMn)
Raw water: 65.0mg/ℓ / Treated water: 4.1mg / ℓ or less / Analysis method: JISK010217

5_3. Norman hexane extract (animal and vegetable oil)
Raw water: 95.0mg/ℓ / Treated water: 3.0mg / ℓ or less / Analysis method: JISK0102

5_4. Norman hexane extract (mineral oil)
Raw water: 232.0mg/ℓ / Treated water: 5.0mg / ℓ or less / Analysis method: JISK0102

5_5.Cheavy oil
Raw water: Measured value over / Treated water: Less than 5.0 mg / ℓ / Analysis method: Gas chromatograph method

Shipping Countries: Switzerland, Monaco, France, Slovakia, Liechtenstein, Czech Republic, Portugal, Iceland, Belarus, Ukraine, Netherlands, Slovenia, Denmark, Ireland, Belgium, North Macedonia, Germany, Azerbaijan, Spain, Lithuania, Estonia, Romania, Italy, Bulgaria, United Kingdom (UK), Norway, Greece, Austria, Sweden, Luxembourg, Finland, Russia, Latvia, Croatia, Poland, Hungary, El Salvador, Canada, United States (US), Mexico, Barbados, Costa Rica, Puerto Rico, Chile, Peru, Argentina, Brazil, Saudi Arabia, United Arab Emirates, Qatar, Turkey, Israel, China, Mongolia, Japan, South Korea, Macao, Taiwan, Philippines, Hong Kong, Thailand, Brunei, India, Maldives, Pakistan, Bangladesh, Malaysia, Nepal, Sri Lanka, Bhutan, Cambodia, Singapore, Laos, New Caledonia, Australia, New Zealand, Fiji, Morocco, Tunisia, Egypt, South Africa


Additional information

Oil / water recovery

From10 to 20 liters / minute

Target oil

Mineral oil / animal and vegetable oil

Collection method

Float type

Oil recovery float unit_outer shape

φ500×420

Oil recovery float unit_weight

6kg

Oil recovery float unit_hose

25A

Oil recovery float unit_Material

Resin / SUS304

Oil adsorption device unit_shape

500×(500)×(1920)

Oil adsorption device unit_Filling material

Filtor FT 24kg

Oil adsorption device unit_Weight (when full)

170kg(250kg)

Oil adsorption device unit_Raw water inlet diameter / Raw water return caliber

20A

Oil adsorption device unit_Treated water outlet diameter

40A

Oil adsorption device unit_Drain caliber

40A

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Vendor Information

  • Store Name: Mtech
  • Vendor: Mtech
  • Address: 252-0816
    Kanagawa 2005-1 Endo, Fujisawa City
    Japan
  • No ratings found yet!

Basically, we don’t accept returns for the convenience of our customers.

Main Menu

Mtech-Adsorption type oil-water separator(OSU-20)