Mtech-Adsorption type oil-water separator(OSU-10)

-Adsorption type oil-water separator

-Model: LW-MTS-OSU series
-Industry’s first filling material storage! Cartridge method
-Filled with high-performance oil-impregnated wastewater treatment material “Filtor FT”
-The recovery part has a float structure that follows liquid level fluctuations.
-Continuous suction and recovery of surface oil
-Consumables are oil adsorbents only,
-Low running cost

Equipment configuration

-Oil recovery float unit
-Water supply unit (pump: separate type)
-Oil adsorption device Unit

Use

The oil film and surface oil floating on the premises drainage pit and the existing oil-water separation tank are recovered by the oil recovery float floating on the liquid surface, and the oil and water are separated by the oil-water separation device (oil adsorption method). To do.

Feature

1. The industry’s first storage of filler! Uses a cartridge method (processing amount: approx. 5 liters / minute / book)
-1_1: Easy to replace the filler! (The filler is packed in a mesh bag.)
-1_2: Compact design allows effective use of space.
-1_3: The number of cartridges used can be set according to the estimated oil processing amount.

2. Since it is filled with “Filtor FT”, a high-performance oil-containing wastewater treatment material that can also treat emulsified oil (engineered mardiyonization), the treated water can be n hexane extract substance: 5 ppm or less.

3. The recovery unit has a float structure that follows liquid level fluctuations and continuously sucks and recovers surface oil.

4. Consumables are oil adsorbents only. The running cost is low.

============================================

Specification

Type:
OSU-10

1.Overview
1_1:Oil / water recovery amount:
~ 10 liters / minute

1_2:Target oils:
mineral oils, animal and vegetable oils

1_3:Collection method:
Float type

2.Oil recovery float unit
2_1:External shape:
φ500 x 420

2_2:Oil recovery port:
Select according to the installation environment and processing amount

2_3:Weight (excluding hose):
6 kg

2_4:Hose:
25A

2_5:Material:
Resin, SUS304

3.Water supply unit
3_1:Pump:
We will select according to your company’s lift and specifications.

4.Oil adsorption device unit
4_1:Shape:
500 x (500) x (1920)

4_2:Filling material:
Filtor FT 12kg

4_3:Weight (when full):
142 kg (192 kg)

4_4:Raw water inlet diameter / Raw water return diameter:
20A

4_5:Treated water outlet diameter:
40A

4_6:Drain caliber:
40A

* Model selection may differ depending on the conditions of raw water. Please contact us for other flow rates.
* Dimensions and weight are built-in options.

5.Test data / Analysis result
5_1:Biochemical Oxygen Demand (BOD)
Raw water: 98.0mg/ℓ / Treated water: 5.8mg / ℓ or less / Analysis method: JIS K010221

5_2. Chemical Oxygen Demand (CODMn)
Raw water: 65.0mg/ℓ / Treated water: 4.1mg / ℓ or less / Analysis method: JISK010217

5_3. Norman hexane extract (animal and vegetable oil)
Raw water: 95.0mg/ℓ / Treated water: 3.0mg / ℓ or less / Analysis method: JISK0102

5_4. Norman hexane extract (mineral oil)
Raw water: 232.0mg/ℓ / Treated water: 5.0mg / ℓ or less / Analysis method: JISK0102

5_5.Cheavy oil
Raw water: Measured value over / Treated water: Less than 5.0 mg / ℓ / Analysis method: Gas chromatograph method